Finished Projects › Projects by Activity Areas › Industrial Electronics › E1803D compact XY2/100 scanner controller
E1803D compact XY2/100 scanner controller
- CLIENT: HALaser Systems
The E1803 controller is a scanner and laser controller used in laser marking industry. It can be used with all XY2-100 compatible scanheads.
For more information or if you want to buy, please refer to halaser.eu
The E1803 Controller provides the following general features:
- can be used with any scanhead with XY2-100 or XY2-100-E interface
- 100 Mbit Ethernet connection, USB 2.0 connection
- online XYZ grid correction with support for several correction table file formats (like BeamConstruct HD .bco correction files, SCAPS™ .ucf, Scanlab™ .ctb and .ct5, Raylase™ .gcd, GSI/CTI™ .xml)
- fast online switching between up to 16 grid correction tables
- 10 microseconds vector cycle time and resolution (microstep period), command execution time down to 0,5 microseconds
- realtime processing of laser and scanner signals
- 26 bit internal resolution (for better quality also with 16 or 18 bit hardware output)
- 512 MByte DDR3 RAM, 1 GHz CPU clock
- extremely low power consumption of about 2 W (without scanhead power supply)
- internal command and vector data list with more than 20 million entries
- continuous list concept, no need to swap between lists
- compact size of about 125 mm x 100 mm
Besides that it provides the following connectivity features and interfaces:
- 16 bit XY2-100 interface to scanhead with X, Y and Z channel
- 18 bit XY2-100-E interface to scanhead with X, Y and Z channel
- two laser CMOS level digital outputs for usage with YAG, CO2, IPG™, SPI™ and other compatible laser types (outputs can provide PWM frequency, Q-Switch, FPK-pulse, continuously running frequency, stand-by frequency), running with frequencies up to 20 MHz
- LP8 8 bit CMOS level parallel digital output e.g. for controlling laser power
- LP8 latch and Master Oscillator CMOS level digital output for usage with IPG™ and compatible laser types
- 2x 12 bit 0..10 V analogue outputs e.g. for controlling power of SPI™ lasers
- 8 digital inputs and 8 digital outputs can be switched to opto-insulated mode with external power supply of up to 24 V
- 2x2 inputs can be used for 90 degree phase-shifted encoder signals for 1D and 2D marking on-the-fly applications
- digital inputs can be used to select one of up to 256 stand-alone marking jobs stored on microSD card of baseboard
- RS232/RS485 serial interface
- can be powered with 12..24 V with direct supply to scanhead to save additional wiring
- support for Micro-SD and Micro-SDHC cards with up to 32 GByte disk space for stand-alone operations
- support for matrix laser/dot peen stand-alone mode with up to two lines of text and up to 2 MHz dot frequency
